Upgrade Guide

This document describes breaking changes and how to upgrade. For a complete list of changes including minor and patch releases, please refer to the changelog.

Unreleased

3.6.0

The shared library ABI version (SOVERSION) is increased from 3.5 to 3.6. Thus, consuming libraries need to update their wheel repair configuration for cibuildwheel to ensure the mqt-core libraries are properly skipped in the wheel repair step.

Changes to builtin QDMI devices

The builtin QDMI devices (with prefixes MQT_SC, MQT_NA, and MQT_DDSIM) are now all built as shared libraries by default. In turn, the shared library wrappers (with prefixes MQT_SC_DYN and MQT_NA_DYN) have been removed entirely. MQT Core’s QDMI driver will automatically load the shared libraries of the builtin devices if they are available in the library search path. If you were previously using the statically builtin devices, no changes should be necessary as the shared libraries are now the default. If you were previously using the shared library wrappers, you should switch to using the builtin devices instead, which are now shared libraries by default.

Broader operation support in QDMI Qiskit converter

The QDMI Qiskit converter now supports a broader range of operations, including multi-controlled gates such as mcx, mcz, mcrx, and more. As a consequence, these operations can now be directly used without requiring decomposition, for example, with the builtin DDSIM QDMI device.

Minimum supported Qiskit version

From this release onwards, MQT Core requires Qiskit version 1.1.0 or higher. This is due to the fact that we are relying on some fixes to Qiskit primitives that were introduced in that version. If you are using MQT Core with Qiskit, please ensure that you have updated to Qiskit 1.1.0 or higher to avoid any compatibility issues.

3.5.1

No breaking changes.

Component-based CMake installs

Fixed exported nlohmann_json CMake metadata so find_package(mqt-core CONFIG) no longer propagates an invalid .../COMPONENT include directory in component-based installations. Anyone relying on an installed version of mqt-core should update from 3.5.0 to 3.5.1.

3.5.0

The shared library ABI version (SOVERSION) is increased from 3.4 to 3.5. Thus, consuming libraries need to update their wheel repair configuration for cibuildwheel to ensure the mqt-core libraries are properly skipped in the wheel repair step.

nanobind updated to version 2.12.0

This release updates the nanobind dependency to version 2.12.0, which includes an ABI bump. Any existing code that uses the mqt-core Python bindings will need to be recompiled with the new nanobind version.

3.4.0

The shared library ABI version (SOVERSION) is increased from 3.3 to 3.4. Thus, consuming libraries need to update their wheel repair configuration for cibuildwheel to ensure the mqt-core libraries are properly skipped in the wheel repair step.

Python wheels

This release contains two changes to the distributed wheels.

First, we have removed all wheels for Python 3.13t. Free-threading Python was introduced as an experimental feature in Python 3.13. It became stable in Python 3.14.

Second, for Python 3.12+, we are now providing Stable ABI wheels instead of separate version-specific wheels. This was enabled by migrating our Python bindings from pybind11 to nanobind.

Both of these changes were made in the interest of conserving PyPI space and reducing CI/CD build times. The full list of wheels now reads:

  • 3.10

  • 3.11

  • 3.12+ Stable ABI

  • 3.14t

QDMI-Qiskit integration

This release introduces a Qiskit BackendV2-compatible interface to QDMI devices. The mqt.core.plugins.qiskit module has been extended with QDMIProvider, QDMIBackend, and QDMIJob classes that allow running Qiskit circuits on QDMI-compliant devices.

Users can now execute Qiskit circuits directly on QDMI devices:

from mqt.core.plugins.qiskit import QDMIProvider

provider = QDMIProvider()
backend = provider.get_backend("MQT Core DDSIM QDMI Device")
job = backend.run(circuit, shots=1024)
result = job.result()

The backend automatically converts circuits to QASM, introspects device capabilities, validates circuits, and formats results. The existing FoMaC interface (mqt.core.fomac) remains fully supported for direct, low-level access to QDMI devices.

Install with Qiskit support: uv pip install "mqt-core[qiskit]"

See the Qiskit Backend documentation for details.

Argument name changes in QuantumComputation and CompoundOperation dunder methods

Since we enabled ty for type checking, it revealed that some of the dunder methods of QuantumComputation and CompoundOperation had incorrect argument names, which would prevent these classes from properly implementing the MutableSequence protocol. This release fixes these issues by renaming the arguments of the following methods:

  • QuantumComputation.__getitem__

  • QuantumComputation.__setitem__

  • QuantumComputation.__delitem__

  • QuantumComputation.insert

  • QuantumComputation.append

  • CompoundOperation.__getitem__

  • CompoundOperation.__setitem__

  • CompoundOperation.__delitem__

  • CompoundOperation.insert

  • CompoundOperation.append

All index arguments are now named index instead of idx (or i or slice) and all values are now named value instead of val (or op or ops).

DD Package evaluation

This release moves the DD Package evaluation functionality from within the mqt.core package to a dedicated script in the eval directory. In the process, the mqt-core-dd-compare entry point as well as the evaluation extra have been removed. The eval/dd_evaluation.py script acts as a drop-in replacement for the previous CLI entry point. Since the eval directory is not part of the Python package, this functionality is only available via source installations or by cloning the repository.

3.3.0

The shared library ABI version (SOVERSION) is increased from 3.2 to 3.3. Thus, consuming libraries need to update their wheel repair configuration for cibuildwheel to ensure the mqt-core libraries are properly skipped in the wheel repair step.

IfElseOperation

This release introduces an IfElseOperation to the C++ library and the Python package to support Qiskit’s IfElseOp. The new operation replaces the ClassicControlledOperation.

An IfElseOperation can be added to a QuantumComputation using if_else().

qc.if_else(
    then_operation=StandardOperation(target=0, op_type=OpType.x),
    else_operation=StandardOperation(target=0, op_type=OpType.y),
    control_bit=0,
)

If no else operation is needed, the if_() method can be used.

qc.if_(op_type=OpType.x, target=0, control_bit=0)

End of support for Python 3.9

Starting with this release, MQT Core no longer supports Python 3.9. This is in line with the scheduled end of life of the version. As a result, MQT Core is no longer tested under Python 3.9 and no longer ships Python 3.9 wheels.

3.2.0

The shared library ABI version (SOVERSION) is increased from 3.1 to 3.2. Thus, consuming libraries need to update their wheel repair configuration for cibuildwheel to ensure the mqt-core libraries are properly skipped in the wheel repair step.

With this release, the minimum required C++ version has been raised from C++17 to C++20. The default compilers of our test systems support all relevant features of the standard. Some frameworks we plan to integrate with even require C++20 by now.

The dd.BasisStates, ir.operations.ComparisonKind, ir.operations.Control.Type, and ir.operations.OpType enums are now exposed via pybind11’s new py::native_enum, which makes them compatible with Python’s enum.Enum class (PEP 435). As a result, the enums can no longer be initialized using a string. Instead of OpType("x"), use OpType.x.

3.1.0

The shared library ABI version (SOVERSION) is increased from 3.0 to 3.1. Thus, consuming libraries need to update their wheel repair configuration for cibuildwheel to ensure the mqt-core libraries are properly skipped in the wheel repair step.

Even though this is not a breaking change, it is worth mentioning to developers of MQT Core that all Python code (except tests) has been moved to the top-level python directory. Furthermore, the C++ code for the Python bindings has been moved to the top-level bindings directory.

DD Package

The makeZeroState, makeBasisState, makeGHZState, makeWState, and makeStateFromVector methods have been refactored to functions taking the DD package as an argument. These functions reside in the StateGeneration header. Any existing code that uses these methods must replace the respective calls with their function counterpart.

3.0.0

This major release introduces several breaking changes, including the removal of deprecated features and the introduction of new APIs. In preparation for this release, most direct dependents of MQT Core have been updated to use the new APIs. The following sections describe the most important changes and how to adapt your code accordingly. We intend to provide a more comprehensive migration guide for future releases.

Intermediate Representation (IR)

The OpenQASM parser has been encapsulated in its own library, which is now a dedicated target in the CMake build system. Any use of qc::QuantumComputation::import... needs to be replaced with the respective qasm3::Importer::load... function.

Several parsers have been removed, including the .real, .qc, .tfc, and GRCS parsers. The .real parser lives on as part of the MQT SyReC project. All others have been removed without replacement.

The Teleportation gate has been removed from the IR. This was a placeholder gate and was only used in a single method (in MQT QMAP), which is bound to be removed as part of MQT QMAP v3.0.0.

MQT QCEC, MQT QMAP, and MQT DDSIM have been updated to use the new API, which will be released in MQT QCEC v3.0.0, MQT QMAP v3.0.0 and MQT DDSIM v2.0.0.

DD Package

The DD package has undergone some initial refactoring to streamline the implementation and prepare it for future extensions. The Config template has been removed in favor of a constructor that takes the configuration as a parameter. Any existing code using dd::Package<...> needs to be updated to use dd::Package or dd::Package(numQubits, ...) instead. The MemoryManager and adjacent classes have been refactored to remove the template parameters. This should not have user-visible effects, but it is a breaking change nonetheless. Depending libraries may now also use the mqt-core Python package to interact with the DD package.

MQT QCEC and MQT DDSIM have been updated to use the new API, which will be released in MQT QCEC v3.0.0 and MQT DDSIM v2.0.0.

Neutral Atom Quantum Computing

The NAComputation class hierarchy has been refactored to use an MLIR-inspired design. This will act as a foundation for future extensions and improvements.

MQT QMAP has been updated to use the new API, which will be released in MQT QMAP v3.0.0.

General

MQT Core has moved to the munich-quantum-toolkit GitHub organization under https://github.com/munich-quantum-toolkit/core. While most links should be automatically redirected, please update any links in your code to point to the new location. All links in the documentation have been updated accordingly.

MQT Core now ships all its C++ libraries as shared libraries with the mqt-core Python package. Depending packages can now solely rely on the Python package for obtaining the C++ libraries. This is demonstrated in MQT QCEC v3.0.0, MQT QMAP v3.0.0 and MQT DDSIM v2.0.0, which will be released in the near future.

MQT Core now requires CMake 3.24 or higher. Most modern operating systems should have this version available in their package manager. Alternatively, CMake can be conveniently installed from PyPI using the cmake package.

It also requires the uv library version 0.5.20 or higher.